TWS 2250HD Well Service Pump
2250 Triplex Plunger Pump is Commonly used Fracturing Equipment. For this pump,the double cylinder oblige gear transmission driving model make the equipment uniform force and improve the pump's stability and service life.
The TWS 2250HD is a high-powered Triplex Plunger Pump design. The pump has undergone extensive testing and analysis following continual product improvement initiatives resulting in a greater rod load capacity compared to its previous version. The TWS 2250HD is available in multiple plunger sizes offering impressive flow rate as well as high pressure potential and can be customized with various features to be utilized in a variety of pumping operations.
TWS 2250HD Performance Specs
Max Brake Horsepower:2,250 BHP(1,641 Kw) Approx. Length:89.8 Inches(2,280 mm)
Max Rod Load Capacity:238,570 lbf (108,214 kg) Approx. Width:59.8 Inches(1,518 mm)
Stroke Length:8 Inches(203.2 mm) Approx. Height:44.3 Inches(1,124 mm)
Gear Ratio:6.353 : 1 Approx. Weight (Dry):11,750 lb(5,329.7 kg)
Performance Parameter
PLUNGER DIAMETER | OUTPUT PER REV | DISPLACEMENT AT PUMP STROKES PER MINUTE / PINION RPM |
75/476 | 115/731 | 148/943 | 200/1271 | 300/1906 | 330/2096 |
mm (in) | gal/rev (liter/rev) | gpm (lpm) | Kg/cm2 (PSI) | gpm (lpm) | Kg/cm2 (PSI) | gpm (lpm) | Kg/cm2 (PSI) | gpm (lpm) | Kg/cm2(PSI) | gpm (lpm) | Kg/cm2(PSI) | gpm (lpm) | Kg/cm2(PSI) |
88.9 (31/2) | 3.8 (1.00) | 284 (75) | 1747 (24,796) | 435 (115) | 1,747 (24,796) | 562 (148) | 1,648 (23,390) | 757 (200) | 1,223 (17,361) | 1,135 (300) | 816 (11,574) | 1,249 (330) | 742 (10,522) |
95.3 (33/4) | 4.3 (1.15) | 326 (86) | 1,522 (21,600) | 499 (132) | 1,522 (21,600) | 645 (170) | 1,436 (20,375) | 869 (229) | 1,066 (15,124) | 1,303 (344) | 711 (10,082) | 1,433 (379) | 646 (9,166) |
101.6 (4) | 4.9 (1.31) | 371 (98) | 1,338 (18,985) | 568 (150) | 1,338 (18,985) | 734 (194) | 1262 (17,908) | 988 (261) | 937 (13,292) | 1,483 (392) | 624 (8,861) | 1,631 (431) | 568 (8,056) |
114.3 (41/2) | 6.3 (1.65) | 469 (124) | 1,057 (15,000) | 719 (190) | 1,057 (15,000) | 928 (245) | 997 (14,150) | 1,251 (330) | 740 (10,502) | 1,876 (496) | 493 (7,002) | 2,064 (545) | 449 (6,365) |
127.0 (5) | 7.7 (2.04) | 579 (153) | 856 (12,150) | 888 (235) | 856 (12,150) | 1146 (303) | 808 (11,461) | 1,544 (408) | 600 (8,507) | 2,316 (612) | 400 (5,671) | 2,548 (673) | 363 (5,156) |
139.7 (51/2) | 9.3 (2.47) | 701 (185) | 708 (10,042) | 1,074 (284) | 708 (10,042) | 1,387 (366) | 668 (9,472) | 1,869 (494) | 495 (7,031) | 2,803 (741) | 330 (4,687) | 3,083 (815) | 300 (4,261) |
146.1 (53/4) | 10.2 (2.70) | 766 (202) | 647 (9,187) | 1,174 (310) | 647 (9,187) | 1,516 (401) | 611 (8,666) | 2,042 (540) | 453 (6,433) | 3,063 (809) | 302 (4,288) | 3,370 (890) | 275 (3,898) |
152.4 (6) | 11.1 (2.94) | 834 (220) | 595 (8,438) | 1279 (338) | 595 (8,438) | 1,651 (436) | 561 (7,959) | 2,224 (588) | 416 (5,908) | 3,336 (881) | 278 (3,938) | 3,669 (969) | 252 (3,580) |
165.1 (61/2) | 13.0 (3.45) | 979 (259) | 507 (7,190) | 1,501 (396) | 507 (7,190) | 1,937 (512) | 478 (6,782) | 2,610 (690) | 355 (5,034) | 3,915 (1,034) | 236 (3,356) | 4,306 (1,138) | 215 (3,051) |
171.5 (63/4) | 14.1 (3.72) | 1,055 (279) | 470 (6,667) | 1,618 (428) | 470 (6,667) | 2,089 (552) | 443 (6,289) | 2,814 (744) | 329 (4,668) | 4,222 (1,115) | 219 (3,112) | 4644 (1,227) | 199 (2,829) |
177.8 (7) | 15.1 (4.00) | 1,135 (300) | 437 (6,199) | 1,740 (460) | 437 (6,199) | 2,247 (594) | 412 (5,848) | 3,027 (800) | 306 (4,340) | 4540 (1,200) | 204 (2,894) | 4,994 (1,319) | 185 (2,630) |
190.5 (71/2) | 17.4 (4.59) | 1,303 (344) | 381 (5,400) | 1,998 (528) | 381 (5,400) | 2,579 (681) | 359 (5,094) | 3,475 (918) | 266 (3,781) | 5,212 (1,377) | 178 (2,521) | 5,733 (1,515) | 161 (2,291) |
INPUT POWER: BHP (Kw) | 899(1,205) | 1,379(1,848) | 1,679(2,250) | 1,679(2,250) | 1,679(2,250) | 1,679(2,250) |
1. Based on 90% ME and 100% VE - Intermittent Service Only.
2 .Pumps with pressures in excess of 15,000 psi require special gauge and discharge flanges. Contact Weir SPM Engineering.
TWS 2250HD Hydraulic Horsepower Curve-Max hydraulic horsepower
Group Strength Advantages:
With registered capital RMB 84.76 million, covering 220,000 square meters, 76 workshops, 1058 Staffs, 950 sets of cold and heat machining equipment, 50 sets of numerically controlled equipment, ZYZJ O&G Group has consecutively established the strategic partnership with SINOPEC, CNPC, Zhongyuan Oil Field and Shengli Oil Field, and leveraged its technical and manufacturing advantages to provide satisfactory products and solution services to customers at home and abroad.
All products are manufactured under ISO9001, ISO14001,and comply with the requirements of API spec (acquired in 1999, including API 4F、5CT、7K、8C、11AX、11B、11E)
With professional teams experienced in the maintenance of drilling machinery,TDS,SCR equipment, we can undertake Pumping Unit oil well on-site management services.
Long-term supply accessories of Drilling Rigs , workover rigs, Mud Pump and beam pumping unit, and distribute drill pipe, drill collar, casing, tubing, special drill pipe sub etc.
One of professional oilfield equipment manufacturers & exporters from China.Our products are based on advanced production line and testing equipment,designed and manufactured according to certification of API, ISO, GOST, etc.
On the basis of more than 40 years of manufacturing experience,more than 30 years of export experience, high quality products with competitive price, better understanding in Chinese market,High quality after-sales service,we hope to establish business relations with your company.
We are major at Cementing and Fracturing Equipment, Gate Valve and wellhead Christmas Tree,Plunger Pumps and Mud Pumps, Flow line Products, Solid Control Equipment,Drilling Rigs and Work over Rigs Matching Equipment etc.
High quality & Steady quantity & Most competitive price will be sent for you.